All categories

TIG Consumables

SCHWEISSKRAFT EG 5 TUNGSTEN ELECTRODE GRINDER
Schweisskraft EG 5 Tungsten Electrode Grinder
In Stock: 1 item(s)
€59900
(Including VAT)
+ −
Schweisskraft EG 5 Tungsten Electrode Grinder For the perfect sharpening of tungsten electrodes with a diameter of 1.6 to 5 mm Grinding angle steplessly adjustable from 15 to 60° 220 - 240 Volt - 13 amp plug Stop unit integrated in the device for setting the correct grinding...
10 X 2.4MM 2% THORIATED TUNGSTEN
10 x 2.4mm 2% Thoriated Tungsten
In Stock: 2 item(s)
€2499
(Including VAT)
+ −
2% Thoriated - 2.4mm X 150mm Tungsten Electrode (10Pk) 2.4mm x 150mm 2% thoriated (WT20) Ground Annealed
STAINLESS STEEL 316L 1.6MM TIG FILLER RODS X 5 KGS
Stainless Steel 316L 1.6mm TIG Filler Rods x 5 kgs
In Stock: 2 item(s)
€7900
(Including VAT)
+ −
Super 6 316L Stainless Steel TIG Filler Rods 316L Grade Steel. 1.6mm diameter. 5kg weight. A molybdenum bearing stainless steel rod with low carbon content. It is corrosion resistant for joining molybdenum bearing austenitic stainless steel. Standards: AWS: 5.9 ER 316L EN ISO 14343...
STAINLESS STEEL 316L 2.4MM TIG FILLER RODS X 5KGS
Stainless Steel 316L 2.4mm TIG Filler Rods x 5kgs
In Stock: 1 item(s)
€7900
(Including VAT)
+ −
Stainless Steel TIG Filler Rods 316L Grade Steel. 2.4mm diameter. 5kg weight. A molybdenum bearing stainless steel rod with low carbon content. It is corrosion resistant for joining molybdenum bearing austenitic stainless steel. Standards: AWS: 5.9 ER 316L EN ISO 14343 : 19123L...
ALUMINIUM 5356 1.6MM TIG FILLER RODS X 2.5 KGS
Aluminium 5356 1.6mm TIG Filler Rods x 2.5 kgs
In Stock: 2 item(s)
€3499
(Including VAT)
+ −
Aluminium TIG Filler Rods 1.6mm x 2.5kg 5356 grade aluminium. 1.6mm diameter. 2.5kg weight. A general purpose aluminium rod containing 5% magnesium, giving excelent corrosion resistance and high joint strength. Standards: AWS : A5.10 ER 5356 EN ISO 18273 S Al 5356 (AL Mg 5) BS...
SUPER 6 ALUMINIUM 4043 TIG FILLER RODS - 1.6MM X 2.5 KGS
Super 6 Aluminium 4043 TIG Filler Rods - 1.6mm x 2.5 kgs
In Stock: 2 item(s)
€3799
(Including VAT)
+ −
Super 6 Aluminium 4043 TIG Filler Rods - 1.6mm x 2.5 kgs 4043 grade aluminium. 1.6mm diameter. 2.5kg weight. Aluminium alloy with 5% silicon gives excellent flow and penetration. Suitable for joining duraluminium, cast and wrought alloys. NB: weld will discolour if anodised. Standards:...
LONG BACK CAP
Long Back Cap

More than 2 in stock
€349
(Including VAT)
+ −
Long Back Cap Long TIG torch back cap replacement for your TIG torch Use full length tungstens
MEDIUM TIG TORCH BACK CAP
Medium TIG Torch Back Cap

More than 2 in stock
€1299
(Including VAT)
+ −
Medium TIG Torch Back Cap Medium TIG torch back cap for getting into tight spaces with your TIG torch. Requires you to cut your tungsten to size
10 X 2.4MM 0.8% ZIRCONIATED TUNGSTEN
10 x 2.4mm 0.8% Zirconiated Tungsten

More than 2 in stock
€2499
(Including VAT)
+ −
0.8% Zirconiated - 2.4mm X 150mm Tungsten Electrode (10Pk) Zirconiated tungstens are for non-ferrous metals eg. Aluminium and Manganese. For use with a welder with AC mode. No need to sharpen these tungstens as once you start it will form a ball at the end. 2.4mm x 150mm 0.8% Zirconiated (WT20) Ground Annealed
MILD STEEL A18 2.4MM TIG FILLER RODS X 5.0 KGS
Mild Steel A18 2.4mm TIG Filler Rods x 5.0 kgs
In Stock: 1 item(s)
€2999
(Including VAT)
+ −
Mild Steel A18 TIG Filler Rods 70S-6 grade mild steel 2.4mm diameter 5.0kg weight Copper coated
10 X 1.6MM 2% THORIATED TUNGSTEN
10 x 1.6mm 2% Thoriated Tungsten

More than 2 in stock
€1699
(Including VAT)
+ −
2.4MM - COLLET BODY - WP17/18/26
2.4mm - Collet Body - WP17/18/26

More than 2 in stock
€1249
(Including VAT)
+ −
2.4mm (Pack 5) - Collet Body - 3/32" WP17/18/26 Collet bodies to suit WP17, WP18, WP26 Torches
SHORT TIG TORCH BACK CAP
Short TIG Torch Back Cap

More than 2 in stock
€249
(Including VAT)
+ −
Short TIG Torch Back Cap Short back cap for getting into very tight spaces with your TIG torch. Requires you to cut your tungsten to size
1 X 3.2MM 0.8% ZIRCONIATED TUNGSTEN
1 x 3.2mm 0.8% Zirconiated Tungsten

More than 2 in stock
€699
(Including VAT)
+ −
0.8% Zirconiated - 3.2mm X 150mm Tungsten Electrode x 1 See bottom of page for suitable collets, collet bodies and ceramic cups. Zirconiated tungstens are for non-ferrous metals eg. Aluminium and Manganese. For use with a welder with AC mode. No need to sharpen these tungstens as once you start it will form a ball at the end. 3.2mm x 150mm 0.8% Zirconiated (WT20) Ground Annealed Single tungsten
10 X 1.6MM 0.8% ZIRCONIATED TUNGSTEN
10 x 1.6mm 0.8% Zirconiated Tungsten

More than 2 in stock
€1499
(Including VAT)
+ −
0.8% Zirconiated - 1.6mm X 150mm Tungsten Electrode (10Pk) Zirconiated tungstens are for non-ferrous metals eg. Aluminium and Manganese. For use with a welder with AC mode. No need to sharpen these tungstens as once you start it will form a ball at the end. 1.6mm x 150mm 0.8% Zirconiated (WT20) Ground Annealed
1 X 1.6MM 0.8% ZIRCONIATED TUNGSTEN
1 x 1.6mm 0.8% Zirconiated Tungsten

More than 2 in stock
€299
(Including VAT)
+ −
0.8% Zirconiated - 1.6mm X 150mm Tungsten Electrode x 1 Zirconiated tungstens are for non-ferrous metals eg. Aluminium and Manganese. For use with a welder with AC mode. No need to sharpen these tungstens as once you start it will form a ball at the end. 1.6mm x 150mm 0.8% Zirconiated (WT20) Ground Annealed Single tungsten
5 X WP17/WP26 NO.4 TIG CERAMIC CUP
5 x WP17/WP26 No.4 TIG Ceramic Cup

More than 2 in stock
€999
(Including VAT)
+ −
WP17/WP26 No.4 TIG Ceramic Cup Standard cup 1/4" Bore. Pack of 5. These ceramic cups fit Weldcraft & Weldcraft compatible TIG torches. *Consumables and spares are non-returnable.
1.6MM - STANDARD COLLETS (5)
1.6mm - Standard Collets (5)

More than 2 in stock
€699
(Including VAT)
+ −
1.6mm (Pack 5) - Standard Collets - 1/16"
2.4MM - STANDARD COLLETS
2.4mm - Standard Collets

More than 2 in stock
€699
(Including VAT)
+ −
2.4mm (Pack 5) - Standard Collets - 3/32"
5 X WP17/WP26 NO.6 TIG CERAMIC CUP
5 x WP17/WP26 No.6 TIG Ceramic Cup

More than 2 in stock
€999
(Including VAT)
+ −
WP17/WP26 No.6 TIG Ceramic Cup Standard cup 3/8" Bore. Pack of 5. These ceramic cups fit Weldcraft & Weldcraft compatible TIG torches. *Consumables and spares are non-returnable.
MILD STEEL A15 1.2MM TIG FILLER RODS X 5.0 KGS
Mild Steel A15 1.2mm TIG Filler Rods x 5.0 kgs
In Stock: 1 item(s)
€7900
(Including VAT)
+ −
Mild Steel A15 TIG Filler Rods 70S-2 grade mild steel 1.2mm diameter 5.0kg weight Copper coated mild steel rod
1.6MM COLLET BODY - WP17/18/26 (5)
1.6mm Collet Body - WP17/18/26 (5)

More than 2 in stock
€1229
(Including VAT)
+ −
1.6mm (Pack 5) - Collet Body - 1/16" WP17/18/26 Collet bodies to suit WP17, WP18, WP26 Torches
5 X WP17/WP26 NO.10 TIG CERAMIC CUP
5 x WP17/WP26 No.10 TIG Ceramic Cup
In Stock: 2 item(s)
€999
(Including VAT)
+ −
WP17/WP26 No.10 TIG Ceramic Cup Standard cup 5/8" Bore. Pack of 5. These ceramic cups fit Weldcraft & Weldcraft compatible TIG torches. *Consumables and spares are non-returnable.
5 X WP17/WP26 NO.5 TIG CERAMIC CUP
5 x WP17/WP26 No.5 TIG Ceramic Cup

More than 2 in stock
€999
(Including VAT)
+ −
WP17/WP26 No.5 TIG Ceramic Cup Standard cup 5/16" Bore. Pack of 5. These ceramic cups fit Weldcraft & Weldcraft compatible TIG torches. *Consumables and spares are non-returnable.
Show another 20 products